Glossary

Glossary

Glossary

S&OP: meaning, the monthly process and a worked example

S&OP (sales and operations planning) is a monthly process in which sales, operations, supply chain and finance agree one plan that matches demand to supply, usually looking 12 to 18 months ahead. It ends with an executive meeting that signs off the plan.

7 min

Morsa publishes this guide. Morsa is software with an AI agent that works in your ERP, email and Teams; it prepares the S&OP pack, and a person approves what goes out.

The S&OP process, step by step

S&OP runs as a monthly cycle. Names and counts of steps vary by company; these five are the common core, in order [1][2][3][4]:

  1. Data gathering. Collect sales history, stock, open orders, supplier lead times, capacity and known events such as promotions.

  2. Demand planning. Turn the data into one demand forecast that everyone uses.

  3. Supply planning. Operations and procurement work out how to meet it against capacity, stock and lead times, and flag gaps.

  4. Pre-S&OP meeting. A cross-functional team reconciles demand and supply, checks the numbers against financial targets and prepares recommendations.

  5. Executive S&OP meeting. Leaders review, decide the trade-offs and approve one plan.

An example calendar of ours: data by the 3rd, demand review by the 6th, supply review by the 9th, pre-S&OP on the 11th, executive meeting on the 14th. The horizon is up to 18 months at product-family level [3].

Who attends an S&OP meeting

Sales and commercial (demand view), supply chain and operations (capacity and constraints), procurement (supplier commitments), finance (what the plan costs and earns), senior leaders (final calls), and product management (launches and phase-outs) [1]. Each step is usually run by a different team, and executive involvement is essential [4].

S&OP worked example: a plant

A valve plant has two lines at 5,500 units a month each. Sales says next quarter’s demand is 12,000 a month. Example figures are ours.

Item

Units a month

Note

Demand forecast

12,000

Agreed by sales and finance

Line capacity

11,000

2 lines × 5,500

Gap

1,000


Saturday overtime

+800

$6 extra a unit, $4,800

Subcontract

+200

$9 extra a unit, $1,800

Plan

12,000

11,000 + 800 + 200

The extra cost is $4,800 + $1,800 = $6,600 a month. Finance puts the margin on the extra 1,000 units at $25 each, $25,000, so the executives approve both. Executives read units and dollars, so show both [4].

A distributor runs the same cycle on purchases. Summer starts June 1, and sales expects 20% more than the usual $300,000 a month at cost. The extra stock is $60,000 a month, $180,000 over three months. With an 8-week supplier lead time, the order must go in by April 6. Finance checks the credit line can carry it, and the meeting approves the buy.

S&OP vs IBP, S&OE and demand planning

Term

Horizon

Focus

S&OP

12 to 18 months, monthly

Align supply and demand

IBP (integrated business planning)

Not standardized

Same monthly cycle with the financial plan tied in

S&OE (sales and operations execution)

0 to 4 weeks

Quick fixes to disruptions

Demand planning is one step inside S&OP, not the whole thing [1]. EazyStock and TechTarget both treat IBP as the broader step up from S&OP [1][2]; where S&OP ends and IBP starts differs by company. The S&OE horizon is EazyStock’s [1].

S&OP software and demand planning tools

S&OP is first and foremost a process, not a technology [2]. Many companies still prepare the forecast in spreadsheets and plan production in an ERP or MRP module, and some ERP vendors, including Infor, Oracle and SAP, sell S&OP modules [2]. For the planning side, see production planning software and the production planning process.

Your first cycle

  1. Start with your top 2 or 3 product families, not every SKU [1].

  2. Name one owner for the monthly pack.

  3. Build it in a shared spreadsheet and hold the first cycle within 30 days.

  4. Fix the agenda: demand, supply, gaps, decisions, owners, dates.

  5. Invite finance and one executive who can say yes [2].

The sources read do not publish a meeting length or agenda; these are ours.

How plants and distributors use S&OP

The output is one number per product family that sales, operations and finance all plan against. The KPIs usually tracked are forecast accuracy, inventory turnover, stockout rate, on-time in-full delivery and working capital tied up in stock [1]. A plant uses it to decide overtime, hiring and subcontracting before the quarter. A distributor uses it to decide purchases and cash.

Common S&OP mistakes

  1. Poor data. A plan built on a wrong lead time or stock count is wrong everywhere [1]. Fix lead times first.

  2. No executive in the room. Trade-offs need someone who can say yes [2].

  3. A reporting meeting. If nothing is decided, it is not S&OP. Every meeting should end with decisions.

  4. Two forecasts. Sales and operations each plan on their own numbers. The point is one plan [1].

  5. Everything at once. Start with the top product families [1].

  6. No follow-up. A decision without an owner and a date is a wish.

Getting the numbers ready and following the decisions

Most S&OP effort goes into assembling data and chasing actions. Morsa takes both ends:

  1. Before the pre-S&OP meeting it pulls open orders, plan against actual and supplier lead-time slips from your ERPs into one pack.

  2. It shows each gap with the orders it affects, as in the 1,000-unit gap above, and the options. The planner picks and the executives decide.

  3. After the executive meeting, it gives each decision an owner and a date, and follows it to done.

To see it on your own plan, book a 30-minute walkthrough.

Related terms

Sources

  1. EazyStock, What is S&OP? A Guide to Sales and Operations Planning (a software vendor): https://www.eazystock.com/blog/what-is-s-and-op-guide-to-sales-and-operations-planning/ (read 12 November 2026)

  2. TechTarget, Sales and operations planning (S&OP): https://www.techtarget.com/searcherp/definition/sales-and-operations-planning-SOP (read 12 November 2026)

  3. Wikipedia, Sales and operations planning: https://en.wikipedia.org/wiki/Sales_and_operations_planning (read 12 November 2026)

  4. Mastering SAP, 5 Steps of S&OP to Achieve an Integrated Business Plan: https://masteringsap.com/five-essential-steps-of-sales-and-operations-planning-to-achieve-an-integrated-business-plan/ (read 12 November 2026)

Keep reading

Keep reading

Keep reading

Related pages

Glossary

Glossary

Glossary

Operations glossary: 15 terms for plants and distributors

The operations glossary defines 15 terms that plant managers, buyers and warehouse leads use every week, grouped by planning, purchasing and suppliers, shop floor and warehouse. Each term has a one-line definition here and its own page with a formula or a worked example.

Read the page

›

Glossary

Glossary

Glossary

Capacity planning in manufacturing: formula, example and tools

Capacity planning in manufacturing checks whether a plant can make what the plan asks, by comparing the hours demand needs with the hours each work center can deliver. Rated capacity = available hours × utilization × efficiency: 2 machines, 8 hours, 5 days is 80 hours, and at 90% utilization and 95% efficiency that is 68.4 standard hours a week.

Read the page

›

Glossary

Glossary

Glossary

Make to order vs make to stock: definitions, table and how to choose

Make to stock (MTS) builds finished goods to a forecast and ships from inventory; make to order (MTO) starts building only after a customer order arrives. MTS delivers fast but risks holding the wrong stock; MTO holds almost none, but the customer waits for production.

Read the page

›

FAQs

FAQs

FAQs

Questions people ask

Questions people ask

Still have a question? A founder will answer.

01

What does S&OP stand for?

Sales and operations planning.

02

What is S&OP in simple terms?

One monthly meeting, with the numbers prepared beforehand, where the business decides how to meet expected demand.

03

Who runs S&OP?

Each step is usually run by a different team, such as sales for the demand plan, with an executive deciding at the end [2][4].

04

How often should S&OP meetings happen?

Monthly is the norm; some businesses run them weekly or quarterly [1].

05

Does S&OP make sense for a small business?

Yes, in proportion to its size [1].

06

How is S&OP different from demand planning?

Demand planning forecasts what customers will buy. S&OP balances that forecast against supply and finance and approves the plan [1].

Where Morsa fits

Where Morsa fits

Where Morsa fits

Find out where AI could make your plant more money.

Answer a few questions about your plant. We come back with a free Manufacturing AI Profitability Plan, and we tell you honestly if we are not the right fit.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.