Guide

Guide

Guide

Fiix pricing 2026: Free, Basic, Professional and Enterprise, and the alternatives

Fiix has four plans: Free, Basic at $45 a user a month, Professional at $75, and Enterprise by quote. Free stops at 25 active preventive maintenance schedules (PMs), and purchasing starts at Professional, so most plants that buy their own spares land there: $900 a seat a year, $18,000 for 20 seats. E-signatures, the audit trail and ERP integrations sit on Enterprise, at extra cost. Fiix offers month-to-month or annual terms at one listed rate, with no setup fees.

7 min

Morsa publishes this guide. Morsa is software with an AI agent that works in your ERP, email and Teams; it chases suppliers for the parts a PM needs, in their language, and a person approves what goes out. Prices read 17 November 2026.

Quick answer

  • Free: $0, 25 active PMs, limited users, parts inventory included [1].

  • Basic: $45 a user a month. Unlimited PMs and reports, no purchasing [1].

  • Professional: $75 a user a month. Adds purchasing and RFQs, cycle counts and multi-site [1].

  • Enterprise: quote. The only plan with e-signatures, the audit trail and condition-based triggers; ERP and custom API integrations and single sign-on cost extra on top [1].

  • Your 20 seats: $10,800 a year on Basic, $18,000 on Professional [1].

Fiix plans and what each one caps

Fiix, a computerized maintenance management system (CMMS), is “a trademark of Rockwell Automation” [1]. A user is “any named person who logs into Fiix”; work requests are unlimited on every plan, so people who only report a problem do not need a seat [2].

Plan

Price per user a month

What a plant gets, and where it stops

Free

$0

25 active PMs, unlimited requests and work orders, downtime tracking, parts inventory, mobile app. “Limited users.” No reports

Basic

$45

Unlimited PMs, standard reports, resource-based scheduling, technician certification tracking, pass/fail inspections, tool crib, phone support. No purchasing

Professional

$75

Purchasing and RFQs, cycle counts, multi-site, nested PMs, multi-asset work orders, parts forecaster, Fiix Foresight (its AI analysis), custom reports

Enterprise

Quote

Failure codes, e-signatures, audit trail, condition-based triggers, completion controls, database export. Integration Hub, custom APIs, custom workflows and single sign-on “available … for an additional cost”

Two add-ons are priced on request: the Lite License for operators, which needs Basic or higher, and Fiix MAX, an AI assistant, which needs Professional or higher [1].

Terms from Fiix’s FAQ: “a month-to-month subscription or annual subscription plan,” and “There are no additional setup or hardware fees associated with your plan” [2]. The page lists one rate per plan, with no separate annual discount shown.

What a plant that gets audited needs, by Fiix plan

Food, pharma and aerospace plants get asked who did the work, who signed it and what changed. Here is where those features sit, from Fiix’s plan table [1].

Need

Fiix plan

Pass/fail inspection steps on a PM

Basic

Tracking which technician is certified for which job

Basic

Electronic signature on a completed work order

Enterprise

Audit trail of edits

Enterprise

Failure codes for root cause reporting

Enterprise

Rules that stop a work order closing incomplete

Enterprise

So an audited plant should price Fiix Enterprise, not Professional. Elsewhere these sit lower: eMaint includes e-signatures and the audit trail on Professional, MaintainX offers signature capture on every plan, and Limble starts it at Premium+ [3][4][5].

What Fiix costs 18 technicians and 2 planners

Our example: 20 named users. Operators send requests free. List prices, and Fiix lists one rate for monthly and annual terms.

Plan

20 seats a year

Over 3 years

Free

$0, but capped at 25 active PMs

$0

Basic

20 × $45 × 12 = $10,800

$32,400

Professional

20 × $75 × 12 = $18,000

$54,000

Enterprise

Quote, plus integration costs

Quote

Each extra login, such as a storeroom clerk who receives parts, adds $900 a year on Professional. If operators need to close their own simple work orders, ask for the Lite License price before you count them as full seats.

Fiix alternatives and what they cost

Prices from each vendor’s own page. The last column is 20 seats for a year on the plan that tracks parts.

CMMS

Published price

20 seats a year on the parts plan

MaintainX

Free; Essential $20, Premium $65 a user a month billed annually ($25 and $75 monthly) [4]

Premium, 20 × $65 × 12 = $15,600, with purchase orders

Limble

No price on its pricing page; its own cost guide lists Standard $28, Premium+ $69 [5][6]

Premium+, 20 × $69 × 12 = $16,560, with purchase orders

UpKeep

Essential $24, Premium $55 a user a month; upper plans by quote [7]

Premium, 20 × $55 × 12 = $13,200; purchase orders need Enterprise

eWorkOrders

Starter $380, Advanced $480 a month flat, unlimited users [8]

Advanced, $480 × 12 = $5,760 at any headcount, with basic materials management; Starter, PC only, $380 × 12 = $4,560

eMaint (Fluke)

Quote; Professional 3-user minimum, prepaid yearly [3]

Quote

For the four most shortlisted CMMS feature by feature, see MaintainX vs Limble vs Fiix vs UpKeep. Three-year totals for six vendors are in CMMS pricing. Single-vendor detail: Limble pricing, UpKeep alternatives and eMaint pricing.

When the PM part comes from overseas

When Fiix shows next week’s pump PM needs a mechanical seal from your supplier in Germany or Mexico, Morsa sends the ship-date request from the buyer’s mailbox, in the supplier’s language, timed for their morning.

  1. The buyer approves this kind of request once; after that it goes out whenever a PM part is on order.

  2. Morsa reads the reply and writes the date onto the PO in your ERP, and onto the Fiix work order where your plan has API access (Enterprise, at extra cost); on other plans it tells the planner. It warns the planner if the seal lands after the PM.

Book a 30-minute walkthrough.

Which one to pick

Your plant

Pick

25 or fewer active PMs, trying a CMMS

Fiix Free

PMs and reports, purchasing stays in the ERP

Fiix Basic or MaintainX Essential

Buys spares in the CMMS

Fiix Professional; price MaintainX Premium for the same seats

Audited, needs signatures and an audit trail

Fiix Enterprise or eMaint Professional, both by quote

This week: count active PMs (if 25 or fewer, start on Free), then list everyone who closes work orders and price that count on Basic and Professional. Our preventive maintenance checklist helps sort which PMs carry inspection steps.

Sources

  1. Fiix by Rockwell Automation, Pricing (plan cards and plan table): https://fiixsoftware.com/pricing/ (read 17 November 2026)

  2. Fiix, Pricing FAQ (same page): https://fiixsoftware.com/pricing/ (read 17 November 2026)

  3. eMaint, Pricing: https://www.emaint.com/pricing/ (read 17 November 2026)

  4. MaintainX, Pricing: https://www.getmaintainx.com/pricing (read 17 November 2026)

  5. Limble, Pricing plans: https://limble.com/pricing/ (read 17 November 2026)

  6. Limble, CMMS software cost: updated pricing guide for 2026 evaluation (March 9, 2026): https://limble.com/learn/cost/ (read 17 November 2026)

  7. UpKeep, Pricing and plans: https://upkeep.com/pricing/ (read 17 November 2026)

  8. eWorkOrders, CMMS pricing and plans: https://eworkorders.com/pricing/ (read 17 November 2026)

Keep reading

Keep reading

Keep reading

Related pages

Guide

Guide

Guide

Limble vs MaintainX vs Fiix vs UpKeep: which CMMS fits which plant

MaintainX has the lowest paid entry price of the four, $20 a user a month for preventive maintenance (PM) schedules, plus a free plan; parts and purchase orders are $65 on Premium. Limble puts MTBF and MTTR reporting and asset hierarchies on every tier. Fiix, owned by Rockwell Automation, links to PLCs (the machines' controllers) and the ERP, but those links and its failure codes sit on its quoted Enterprise plan. UpKeep has the lowest seat price with parts tracking, $55 on Premium; its purchase orders need the quoted Enterprise plan.

Read the page

›

Guide

Guide

Guide

MaintainX pricing and CMMS software pricing compared: UpKeep, Fiix, Limble and more

MaintainX costs $0, $20 or $65 per user a month billed annually ($25 or $75 billed monthly), with Enterprise by quote. UpKeep lists $24 and $55, Fiix $45 and $75, Limble's own cost page $28 and $69, and Coast $25 and $65, while eMaint and FTMaintenance quote and eWorkOrders charges a flat $380 or $480 a month for unlimited users. On the tier that adds parts and purchase orders (MaintainX Premium, Limble Premium+, Fiix Professional), 10 technicians cost $7,800 to $9,000 a year at list price. Whichever CMMS you choose, someone still has to turn an alarm and an operator's note into a work order. Morsa, which publishes this guide, is built to do that part, on top of the CMMS.

Read the page

›

Guide

Guide

Guide

MaintainX pricing 2026: every plan, what it caps, and the alternatives

MaintainX has four plans: Basic is free, Essential is $20 a user a month billed annually ($25 monthly), Premium is $65 ($75 monthly), and Enterprise is quoted. Essential lets you attach a checklist (MaintainX calls it a procedure) to only 3 work orders a month, so a plant that runs every PM from a checklist needs Premium: $780 a seat a year, $11,700 for 14 technicians and a manager. Parts inventory and purchase orders also start at Premium. People who only send work requests are free.

Read the page

›

FAQs

FAQs

FAQs

Questions people ask

Questions people ask

Still have a question? A founder will answer.

01

Is Fiix free?

Yes, with limits: 25 active PMs and limited users, no credit card. Parts inventory is included even on Free [1].

02

Can I pay Fiix monthly?

Yes. Fiix offers month-to-month or annual subscriptions and lists the same per-user rate [1][2].

03

Fiix vs UpKeep: which is cheaper?

UpKeep Premium is $55 a user a month against Fiix Professional at $75. Fiix includes purchasing at that price; UpKeep keeps purchase orders for Enterprise [1][7].

04

What does Fiix Enterprise cost?

Fiix does not publish it, and integrations, custom APIs and single sign-on cost extra on top. Ask for each line in writing [1].

05

Who owns Fiix?

Rockwell Automation, which holds the Fiix trademark [1].

Where Morsa fits

Where Morsa fits

Where Morsa fits

Find out where AI could make your plant more money.

Answer a few questions about your plant. We come back with a free Manufacturing AI Profitability Plan, and we tell you honestly if we are not the right fit.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.