Guide

Guide

Guide

eMaint pricing 2026: what Fluke's CMMS costs, and the alternatives

eMaint does not publish prices. Its two plans are quote-only: Professional needs at least 3 users and Enterprise at least 5, and both are billed as a prepaid annual commitment. For 12 technicians, the published alternatives with parts or materials management run from $4,560 a year (eWorkOrders Starter, flat, basic materials management on a PC only) to $10,800 (Fiix Professional).

7 min

Morsa publishes this guide. Morsa is software with an AI agent that works in your ERP, email and Teams; it chases suppliers for the parts a preventive maintenance (PM) job is waiting on, and a person approves what goes out. Prices read 17 November 2026.

Quick answer

  • eMaint’s price: by quote only. Professional has a 3-user minimum, Enterprise a 5-user minimum, both prepaid for a year [1].

  • The one third-party figure: Limble’s March 2026 cost guide lists eMaint Professional at $85 a user a month and a Team plan at $69 [2]. eMaint’s own page no longer shows a Team plan [1], and the same guide’s UpKeep and eWorkOrders figures no longer match those vendors’ own pages, so treat $85 as a rough marker [2][6][7].

  • Renewals: eMaint says its price “will not increase for the term of your contract but may be modified at the time of renewal” [1].

  • Cheapest alternative with materials management, 12 seats: eWorkOrders Starter, $380 a month flat, $4,560 a year for any number of users, with basic materials management on a PC only. Advanced adds phones and tablets for $480 a month, $5,760 a year [6].

  • Closest like for like: MaintainX Premium at $65 or Limble Premium+ at $69 a user a month, both with purchase orders: $9,360 and $9,936 a year for 12 seats [3][5].

eMaint plans and what each one includes

eMaint, a computerized maintenance management system (CMMS), is a Fluke Reliability product: the page’s fine print names “Fluke Electronics Corporation, its subsidiary eMaint Enterprises, LLC” [1]. Both plans show “Book a demo” instead of a price.

Plan

Who eMaint built it for

What it adds

Professional

“Established teams scaling reliability across multiple crews and shifts.” 3-user minimum

Work orders and PMs with checklists, meter readings, downtime tracking, parts inventory with forecasting and cycle counts, purchase requisitions, calibrations, e-signatures, offline mobile app, a dedicated Fluke account manager and a sandbox account

Enterprise

“Multi-site, global, or regulated operations with complex integrations.” 5-user minimum

Global multi-site operations and inventory, single sign-on, eMaint’s APIs and pre-built ERP connectors, unlimited request-only portal licences, volume-based licensing incentives and the eMaint AI suite

Paid extras on both plans: implementation, on-site training, a vendor portal, computer systems validation and test scripts, and a slow-track release server [1]. eMaint also says it sells “individual features à la carte” beyond the two tiers [1].

Two things the page does not say: what implementation costs (“Pricing varies by service level”) and how many request-only users Professional includes. Its feature table marks “Unlimited Request Logins” on both plans and “Unlimited Request-Only Portal Licenses” on Enterprise only [1]. Ask which one your operators would use.

What a plant with calibrations and audits needs, by eMaint plan

eMaint puts most compliance features on Professional. Most vendors keep these for a higher plan. Here is where each one sits, from eMaint’s feature table [1].

Need

eMaint plan

Calibration records, calibration labels, standards and tools

Professional

Electronic signatures on work orders

Professional

Audit trail

Professional

Validation scripts for FDA-regulated work

Paid add-on on both plans

Single sign-on with your company login

Enterprise

Several plants in one account

Multi-site management and reporting on Professional; global multi-site operations and global inventory on Enterprise (ask which a second plant needs)

Compare where the same features sit elsewhere. Fiix puts e-signatures and the audit trail on its quoted Enterprise plan [4]. UpKeep puts signature capture on its quoted Professional plan [7]. Limble starts signature capture at Premium+ [5]. So a single-site plant that calibrates gauges and signs off work can stop at eMaint Professional. IT’s single sign-on rule, or an ERP connector, moves you to Enterprise.

What eMaint costs 12 technicians, compared with list prices

Our example: a plant with 12 people who close work orders. eMaint will quote it; here is what the same 12 seats cost on the published plans that track parts, at list price, billed yearly where the vendor says so.

CMMS and plan

Arithmetic

12 seats a year

eMaint Professional

Quote; Limble reports $85 a user a month [2]

Ask eMaint

Fiix Professional

12 × $75 × 12

$10,800

Limble Premium+

12 × $69 × 12

$9,936

MaintainX Premium

12 × $65 × 12

$9,360

UpKeep Premium

12 × $55 × 12

$7,920

eWorkOrders Advanced, basic materials management

$480 × 12, any headcount

$5,760

eWorkOrders Starter, the same on a PC only

$380 × 12, any headcount

$4,560

If the $85 that Limble reports is close, eMaint Professional would be the highest per-seat rate on this list. Take the table to the demo and ask eMaint to price against it. Also ask for the implementation quote in writing, because eMaint prices it by service level and the prepaid year starts either way.

eMaint alternatives and what they cost

CMMS

Published price

Where it differs from eMaint

MaintainX

Free; Essential $20, Premium $65 a user a month billed annually ($25 and $75 monthly); Enterprise by quote [3]

Premium includes parts, purchase orders and an open API; ERP integrations need Enterprise

Fiix (Rockwell Automation)

Free; Basic $45, Professional $75 a user a month; month-to-month or annual [4]

Parts on every plan, purchasing from Professional; e-signatures, audit trail and ERP integrations on Enterprise

Limble

No price on its pricing page; its own cost guide lists Standard $28 and Premium+ $69 a user a month [2][5]

Purchase orders and the API from Premium+; cycle counts, approvals and 21 CFR on Enterprise

UpKeep

Essential $24, Premium $55 a user a month; Professional and Enterprise by quote [7]

Parts from Premium; purchase orders and the API on Enterprise

eWorkOrders

Starter $380, Advanced $480 a month flat, unlimited users; Enterprise $45 to $120 a user, 5-user minimum [6]

Inventory control, signature capture and the API on Enterprise

The shortlisted four, feature by feature, are in MaintainX vs Limble vs Fiix vs UpKeep. Three-year totals for six vendors are in CMMS pricing. For single-vendor detail, see MaintainX pricing, Fiix pricing and Limble pricing.

When a PM is due and the spare is not on the shelf

When eMaint shows Tuesday’s gearbox PM is short a seal kit, Morsa asks the supplier for a ship date from the buyer’s own mailbox.

  1. The buyer approves that kind of request once; after that Morsa sends it for every PM that is short.

  2. Morsa reads the reply and writes the promised date onto the PO in your ERP, and onto the eMaint work order where your plan has API access (Enterprise); on Professional it gives the planner the date. It tells the planner if the date lands after the PM.

Book a 30-minute walkthrough.

Which one to pick

Your plant

Pick

Calibrations, signatures and audits at one site

eMaint Professional; get MaintainX Premium priced for the same seats

Single sign-on, ERP connector

eMaint Enterprise or Fiix Enterprise, both by quote

Lowest published price with parts and purchase orders

MaintainX Premium

Many people log in, few sign anything

eWorkOrders Advanced

This week: count everyone who would close a work order and everyone who only requests one, then ask eMaint for a quote at that count with implementation and renewal terms written in. Record MTBF and MTTR now with our MTBF and MTTR calculator, so you can judge the new system after a year.

Sources

  1. eMaint, Pricing (plans, feature table and FAQ): https://www.emaint.com/pricing/ (read 17 November 2026)

  2. Limble, CMMS software cost: updated pricing guide for 2026 evaluation (March 9, 2026): https://limble.com/learn/cost/ (read 17 November 2026)

  3. MaintainX, Pricing: https://www.getmaintainx.com/pricing (read 17 November 2026)

  4. Fiix by Rockwell Automation, Pricing: https://fiixsoftware.com/pricing/ (read 17 November 2026)

  5. Limble, Pricing plans: https://limble.com/pricing/ (read 17 November 2026)

  6. eWorkOrders, CMMS pricing and plans: https://eworkorders.com/pricing/ (read 17 November 2026)

  7. UpKeep, Pricing and plans: https://upkeep.com/pricing/ (read 17 November 2026)

  8. Vendr, eMaint buyer insights: https://www.vendr.com/marketplace/emaint (read 17 November 2026)

  9. Capterra, eMaint CMMS pricing: https://www.capterra.com/p/100468/eMaint-CMMS/pricing/ (read 17 November 2026)

Keep reading

Keep reading

Keep reading

Related pages

Guide

Guide

Guide

MaintainX pricing and CMMS software pricing compared: UpKeep, Fiix, Limble and more

MaintainX costs $0, $20 or $65 per user a month billed annually ($25 or $75 billed monthly), with Enterprise by quote. UpKeep lists $24 and $55, Fiix $45 and $75, Limble's own cost page $28 and $69, and Coast $25 and $65, while eMaint and FTMaintenance quote and eWorkOrders charges a flat $380 or $480 a month for unlimited users. On the tier that adds parts and purchase orders (MaintainX Premium, Limble Premium+, Fiix Professional), 10 technicians cost $7,800 to $9,000 a year at list price. Whichever CMMS you choose, someone still has to turn an alarm and an operator's note into a work order. Morsa, which publishes this guide, is built to do that part, on top of the CMMS.

Read the page

›

Guide

Guide

Guide

MaintainX pricing 2026: every plan, what it caps, and the alternatives

MaintainX has four plans: Basic is free, Essential is $20 a user a month billed annually ($25 monthly), Premium is $65 ($75 monthly), and Enterprise is quoted. Essential lets you attach a checklist (MaintainX calls it a procedure) to only 3 work orders a month, so a plant that runs every PM from a checklist needs Premium: $780 a seat a year, $11,700 for 14 technicians and a manager. Parts inventory and purchase orders also start at Premium. People who only send work requests are free.

Read the page

›

Guide

Guide

Guide

Limble vs MaintainX vs Fiix vs UpKeep: which CMMS fits which plant

MaintainX has the lowest paid entry price of the four, $20 a user a month for preventive maintenance (PM) schedules, plus a free plan; parts and purchase orders are $65 on Premium. Limble puts MTBF and MTTR reporting and asset hierarchies on every tier. Fiix, owned by Rockwell Automation, links to PLCs (the machines' controllers) and the ERP, but those links and its failure codes sit on its quoted Enterprise plan. UpKeep has the lowest seat price with parts tracking, $55 on Premium; its purchase orders need the quoted Enterprise plan.

Read the page

›

FAQs

FAQs

FAQs

Questions people ask

Questions people ask

Still have a question? A founder will answer.

01

Does eMaint have a free plan or trial?

eMaint's pricing page lists neither; both plans go through a demo [1]. Capterra's eMaint listing shows a free trial with no credit card, so ask for one [9].

02

Can I pay eMaint monthly?

Not on Professional or Enterprise, which eMaint bills “as a prepaid annual commitment” [1].

03

Does eMaint raise prices at renewal?

It may. eMaint holds the price for the contract term only [1]. Two buyers on Vendr report negotiating away a 5% contractual increase at renewal [8].

04

eMaint vs Fiix: which costs less?

Fiix publishes $45 and $75 a user a month; eMaint quotes. Fiix keeps e-signatures and the audit trail for Enterprise, where eMaint includes them in Professional [1][4].

05

Who owns eMaint?

Fluke. eMaint's site names eMaint Enterprises, LLC as a subsidiary of Fluke Electronics Corporation [1].

Where Morsa fits

Where Morsa fits

Where Morsa fits

Find out where AI could make your plant more money.

Answer a few questions about your plant. We come back with a free Manufacturing AI Profitability Plan, and we tell you honestly if we are not the right fit.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.