Glossary

Glossary

Glossary

Production monitoring: what it is, how a system works and what it costs

Production monitoring is capturing machine state, part counts, cycle time and stop reasons automatically and showing them live, so a supervisor can react during the shift instead of reading a report the next day. Two vendors that publish prices charge $47 to $379 per machine per month.

6 min

Morsa publishes this guide. Morsa is software with an AI agent that works in your ERP, email and Teams; it sends the daily brief, and a person approves what goes out.

How a production monitoring system works, step by step

A production monitoring system (also called manufacturing monitoring) is the sensors, software and screens that turn machine signals into a live picture of the line. It has four jobs [1][2]:

  1. Connect. Read run, stop and count signals from the machine’s PLC (its controller), from a retrofit sensor on an older machine, or from a camera that counts parts.

  2. Capture. Record each stop with a start time and an end time, and ask the operator for a reason.

  3. Show. Put each line’s status, output against target and stops on a dashboard or a screen on the floor [5].

  4. Act. Rank the biggest losses by line and shift so the daily meeting starts with them, and alert the right person on a long stop.

That is what “production monitoring software” and “production monitoring tools” do. For a ranked list, see best machine monitoring software.

What to capture on every machine

Data point

Where it usually comes from

Machine state: running, stopped, changeover

PLC, sensor or camera

Part count and cycle time

PLC counter or sensor

Stop reason

Operator on a tablet, or a machine alarm code

Rejects and scrap

Operator entry or an inspection station

Start with state and counts, which are automatic. Add stop reasons next, from a short list (downtime reason codes) [1]. For what to record per job, see shop floor data collection.

Real-time production monitoring: the test

Every vendor says “real time”. Test it in the demo [1]. Stop a machine and time how long the dashboard takes to change. Cause three short stops and look for three events, not one average. Compare the count with a hand count over an hour. A screen that refreshes an hourly report is fast reporting, not monitoring.

What production monitoring software costs

Not every vendor publishes a price. Two that do, as of 12 November 2026:

Vendor and plan

Published price

Evocon, Basic to Enterprise

$189 to $379 per machine per month by plan and term, billed annually; a connection device is $19 to $24 a month more [3]

Scytec DataXchange, Bronze to Platinum

$47, $68, $89 or $140 per machine per month, plus a one-time activation of $1,000 to $2,500 per account [4]

Example: 20 CNC machines on Scytec’s $89 plan, which tracks part counts, scrap and OEE (overall equipment effectiveness: the share of scheduled time spent making good parts at full speed). 20 × $89 × 12 = $21,360, less the 5% volume discount at 20 machines [4] = $20,292, plus $2,000 to activate: $22,292 in year one on a monthly term. Evocon Basic on a 1-year term is $219 plus $24 for the device, $243 a month, or $2,916 per machine per year. Evocon says sensors, cables and displays are not in its license price [3]; Scytec’s page lists no wiring cost. Ask each vendor for a quote per machine. Our OEE software pricing guide compares more tools.

What it is worth, with our numbers: a machine making 2 parts a minute at $3 of margin a part, so $6 a minute. Monitoring finds 40 minutes a day of short stops the paper log missed, and the plant removes a quarter of them, 10 minutes a day. Over 250 production days that is 2,500 minutes, or 5,000 parts and $15,000 a year, if the plant can sell them.

What to do this week, with 20 machines

  1. Work out the break-even. $2,916 ÷ $6 a minute = 486 minutes a year, about 2 minutes a day per machine. If a machine loses more than that to stops nobody logs, monitoring pays for it (our arithmetic).

  2. Start with the 3 bottleneck machines, not all 20. Run them for 30 days with a written scorecard: state, counts, stops with reasons [1].

  3. Get two per-machine quotes with sensors and wiring, and compare year one.

  4. Decide the other 17 from the 30-day numbers.

Production monitoring vs production tracking, OEE and MES

Term

What it adds

Production tracking

More weight on orders, jobs and operator input [1]

OEE software

The OEE score (availability × performance × quality) built from the same data; see OEE

MES

Execution: orders, routings, genealogy. Monitoring does not replace planning or genealogy [2]

How plants use production monitoring

Monitoring production is a daily routine. Operators tag stops as they happen. A supervisor sees which line is stopped and walks there (gemba walk; a stopped-line alert is an andon). The plant manager compares lines and shifts on stop reasons each morning. Maintenance sees which breakdowns cost the most line time [1]. One vendor says connecting devices takes about a month and a full rollout 3 to 4 months [1].

Common production monitoring mistakes

  1. Tracking 30 things on day one. Start with state and counts.

  2. A dashboard nobody watches. Decide who is told about a long stop, and how.

  3. Blank stop reasons. Keep the list short and review it monthly.

  4. Buying before a pilot. Pilot a bottleneck machine first.

Turning the data into a daily brief and follow-up

Morsa works on the data your system or MES already collects:

  1. It reads the machine data and the ERP’s plan, and sends a morning and evening brief per plant: plan versus actual, with the reason for each stop.

  2. When a stop has no reason, it asks the supervisor in Teams and records the answer.

  3. When a stop will make an order late, it shows the order and a proposed fix, which the planner approves.

It is not a sensor system; it adds nothing to the machine. To see it on your plant, book a 30-minute walkthrough.

Related terms

Sources

  1. Fabrico, Production Monitoring Software: How It Works, What to Track and 7 Tools (a vendor guide; updated 10 Nov 2026): https://www.fabrico.io/blog/real-time-production-monitoring-software-guide-2026/ (read 12 November 2026)

  2. Smart RDM, Production monitoring system: 2026 guide: https://smartrdm.com/blog/real-time-production-monitoring-systems-how-they-work-and-what-benefits-they-deliver/ (read 12 November 2026)

  3. Evocon, Pricing: https://evocon.com/pricing/ (read 12 November 2026)

  4. Scytec, DataXchange pricing: https://www.scytec.com/pricing (read 12 November 2026)

  5. Rockwell Automation, Plex Production Monitoring: https://www.rockwellautomation.com/en-us/products/software/factorytalk/operationsuite/mes/plex-production-monitoring.html (read 12 November 2026)

Keep reading

Keep reading

Keep reading

Related pages

Glossary

Glossary

Glossary

Operations glossary: 15 terms for plants and distributors

The operations glossary defines 15 terms that plant managers, buyers and warehouse leads use every week, grouped by planning, purchasing and suppliers, shop floor and warehouse. Each term has a one-line definition here and its own page with a formula or a worked example.

Read the page

›

Glossary

Glossary

Glossary

Andon: what an andon system is and how the cord, lights and escalation work

An andon is a signal that tells a team leader exactly where a problem is on the line, raised by an operator with a cord or button or by a machine sensor. The team leader gets the station's process time, the time allotted for a unit to pass through it, to fix the problem; if it is not fixed in that time, the line stops. Toyota has used andon since 1950.

Read the page

›

Glossary

Glossary

Glossary

Gemba walk: meaning, steps, a checklist and a template

A gemba walk is a scheduled visit by a manager to the place where the work is done, to watch the process and ask the people doing it, so decisions rest on what was seen and not on a report. Gemba is Japanese for the actual place.

Read the page

›

FAQs

FAQs

FAQs

Questions people ask

Questions people ask

Still have a question? A founder will answer.

01

What is a production monitoring system?

The sensors, software and screens that capture machine data and show it live: is the line running, how many parts against target, and what stopped it.

02

What is production line monitoring?

The same thing applied to one line: state, output against the shift target and stops, hour by hour.

03

What is the difference between production monitoring and OEE?

Monitoring captures the data. OEE is one score calculated from it.

04

Do I need sensors on every machine?

Not always. Machines with a networked controller can be read directly; older ones need a retrofit sensor or a camera [1].

05

What are production monitoring tools used for?

Finding the stops the paper log misses and ranking losses.

Where Morsa fits

Where Morsa fits

Where Morsa fits

Find out where AI could make your plant more money.

Answer a few questions about your plant. We come back with a free Manufacturing AI Profitability Plan, and we tell you honestly if we are not the right fit.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.