Morsa publishes this guide. Morsa is software with an AI agent that works in your ERP, email and Teams; it re-ranks items quarterly, and a person approves what goes out.
ABC analysis in five steps, with a worked example
ABC analysis applies the Pareto rule, or 80/20 rule: most of the output comes from a small share of the input [1]. Sage describes the usual split as the top 20% of items at about 80% of value, the next 30% at about 15% and the last 50% at about 5% [2]. The real shares vary by business.
List every item with its annual units and unit cost.
Multiply: annual value = units × unit cost.
Sort from highest to lowest value.
Add a running share of the total.
Cut the list: A where the share reaches about 80%, B to about 95%, C for the rest.
A distributor has 10 SKUs. Example figures are ours. Inputs:
SKU | Units a year | Unit cost |
|---|---|---|
SKU-1 | 4,400 | $50 |
SKU-2 | 3,000 | $40 |
SKU-3 | 1,200 | $50 |
SKU-4 | 2,000 | $20 |
SKU-5 | 4,000 | $5 |
SKU-6 | 1,500 | $10 |
SKU-7 | 500 | $20 |
SKU-8 | 1,500 | $5 |
SKU-9 | 250 | $20 |
SKU-10 | 500 | $5 |
Ranked by annual value, the total is $500,000:
SKU and class | Annual value | Running share of total |
|---|---|---|
SKU-1 (A) | $220,000 | 44% |
SKU-2 (A) | $120,000 | 68% |
SKU-3 (A) | $60,000 | 80% |
SKU-4 (B) | $40,000 | 88% |
SKU-5 (B) | $20,000 | 92% |
SKU-6 (B) | $15,000 | 95% |
SKU-7 (C) | $10,000 | 97% |
SKU-8 (C) | $7,500 | 98.5% |
SKU-9 (C) | $5,000 | 99.5% |
SKU-10 (C) | $2,500 | 100% |
Three SKUs (30% of items) hold 80% of value; four SKUs (40% of items) hold 5%. SKU-5 sells 4,000 units but is a B, because units are not value. Rank by value, not by count.
How plants and distributors use ABC analysis
A distributor uses it to decide which items to stock deep, slot near the pack station and count often. A plant uses it on raw materials and purchased parts to decide which to order weekly and which to order in bulk, as in Wikipedia’s electronics-plant example, where weighting purchase policy by class cut deliveries 69% and average inventory 23% [3].
Cycle counts. Count A items most often, since errors there cost the most. Our example schedule is A 12 times a year, B 4 and C once. For the 10 SKUs that is 3 × 12 + 3 × 4 + 4 × 1 = 52 counts a year, against 10 × 12 = 120 if you counted everything monthly, 57% fewer. The full method, tolerances and a count sheet are on the cycle counting program page.
Safety stock. Set a service level by class instead of one for all. Our suggestion: highest for A, because a stockout there costs the most, and lowest for C. Work out each class with the safety stock calculator.
With 8,000 SKUs
Export 12 months of units and unit cost, compute annual value, sort it high to low and add a running-share column (running total ÷ total). Count how many SKUs it takes to reach 80% and 95%; those counts, not a fixed 20%, are your A and B classes. Put SKUs with no usage in 12 months on a separate no-movement list for review, not in C. Put SKUs under 12 months old on a review-by-hand list.
ABC analysis vs XYZ analysis
ABC sorts by value. XYZ sorts by how predictable demand is [2]. Use both: an AX item is high value with steady demand, so order it often against a forecast; a CZ item is low value with erratic demand, so hold a little and reorder when it moves.
Common ABC analysis mistakes
Ranking by units. SKU-5 shows why; rank by units × cost.
Running it once. Classes drift as sales change [2]. Re-run it quarterly to start.
Ignoring critical C items. A $5 fitting that stops a line is not a C. Bump it up by hand.
A short or odd window. Twelve months of history neutralizes seasonality [5]; a one-off promotion can still push an item to A, so check outliers.
Neglecting B and C. Low value is still stock that can run out [2].
Re-ranking the classes every quarter
Morsa runs the ranking so the classes stay current:
It pulls 12 months of sales or usage and unit cost from your ERP, ranks every SKU and lists the items that should move up or down a class.
It flags C items that sit on an open shortage or a line-critical bill of materials, so the inventory manager can bump them.
The manager approves, and Morsa writes the class into the ERP and updates the cycle count calendar.
To see it on your items, book a 30-minute walkthrough.
Related terms
Operations glossary: every term.
Lead time: the other input to safety stock for each class.
MOQ: C items are where MOQs force you to over-buy.
Pick and pack: A items belong closest to the pack station.
Sources
Shopify Help Center, ABC inventory analysis: https://help.shopify.com/en/manual/products/inventory/abc-analysis (read 12 November 2026)
Sage, ABC analysis: How to use the ABC inventory method: https://www.sage.com/en-us/blog/abc-analysis/ (read 12 November 2026)
Wikipedia, ABC analysis: https://en.wikipedia.org/wiki/ABC_analysis (read 12 November 2026)
Fishbowl, How does ABC analysis improve inventory management? (a software vendor): https://fishbowlinventory.com/blog/abc-analysis (read 12 November 2026)
Lokad, ABC analysis (Inventory): https://lokad.com/abc-analysis-inventory-definition (read 12 November 2026)

