Guide

Guide

Guide

Order to cash automation: how to automate each step, and what to automate first

Order to cash automation is software doing the order to cash work people do by hand: reading orders into the ERP, checking price and credit, confirming supplier dates and updating the customer's promise, invoicing, sending reminders and applying cash. Automate first the handoff whose mistakes create the most work later, often order entry and the promise date, and prove it on one live slice of orders before spreading it.

10 min

Morsa publishes this guide. Morsa is software with an AI agent that works in your ERP, email and Teams; it automates order entry, supplier date follow-up, order status replies and payment reminders, and a person approves what goes out. Sources read 17 November 2026.

Quick answer

  • What gets automated: reading and entering orders, price and credit checks, supplier ship-date confirmations, order status replies, invoice delivery, payment reminders, cash matching.

  • What to automate first: the handoff with the most occurrences times minutes, counting the rework it causes downstream. In our example below, that is order entry, at 58% of the hours.

  • AI vs RPA: RPA repeats fixed clicks; an AI agent reads messy emails and PDFs, asks when unsure and drafts the next message.

  • How to prove it: a pilot on one live problem, measured for four weeks against a two-week baseline from your own records.

What is order to cash automation?

It is the use of software to do the steps of the order to cash process that people now do by reading, typing and chasing. Five kinds of technique do that work:

Technique

What it does well

Where it needs a person

Rules and ERP workflow

Credit holds, approval routing, invoice runs on shipment

Anything that arrives as free text

RPA (robotic process automation)

Repeats the same clicks in the same screens, fast

A new PDF layout or a changed screen breaks the script

OCR and document capture

Turns a PDF purchase order or remittance into fields

Matching a customer’s own part number to yours

EDI

Orders, acknowledgements, ship notices and invoices with trading partners who send EDI

Customers who email PDFs or call

AI agents

Read messy orders and replies, match lines to items, draft the order or the next message, ask when unsure

Lines it cannot match with confidence, and each new kind of message, once

Use RPA where the input never changes, such as an invoice run. Use an AI agent where it does: a contractor’s email that says “same as last time but 40 of the 3/4 inch” needs the last order looked up and the line matched to an item.

How to automate each step of the order to cash process

1. Receive the order

  • What to automate: Pick orders out of the shared inbox, portal and EDI feed

  • Technique: AI agent, EDI

  • What a person still approves: Nothing, unless it is not an order

2. Enter and check

  • What to automate: Read lines, match items and units, check contract price and credit, draft the sales order

  • Technique: AI agent, rules

  • What a person still approves: The drafted order, or a rule for clean repeat orders

3. Promise and acknowledge

  • What to automate: Set the date from stock and open purchase orders; send the acknowledgement

  • Technique: AI agent, ERP

  • What a person still approves: Dates that miss what the customer asked for

4. Source what is short

  • What to automate: Raise the purchase order; ask the supplier to confirm the ship date

  • Technique: Rules, AI agent

  • What a person still approves: New suppliers and price changes

5. Ship

  • What to automate: Update the customer when a supplier date moves; answer where-is-my-order

  • Technique: AI agent

  • What a person still approves: Each kind of customer message, once

6. Invoice

  • What to automate: Invoice on shipment, partials included

  • Technique: ERP workflow, EDI

  • What a person still approves: Credit memos

7. Collect

  • What to automate: Reminders before and after the due date; log the date the customer promises to pay

  • Technique: AI agent

  • What a person still approves: Escalations and disputes

8. Apply the cash

  • What to automate: Match payments and remittances to invoices; route short payments with the invoice and PO

  • Technique: OCR, rules, AI agent

  • What a person still approves: Short payments with no reason

9. Report

  • What to automate: Count each step’s touches, errors and days

  • Technique: ERP reports

  • What a person still approves: Nothing

For step 2 in depth, see sales order automation. For step 4, see purchase order automation.

What to automate first: follow the leaks

Collections is where late cash shows, but some of it starts upstream. In Atradius’s 2025 survey of US companies, 23% of respondents named invoice disputes among the top four reasons their customers paid late [1]. A dispute over a price, quantity or date that went wrong at entry, or never got passed on, is one you can prevent.

So rank your handoffs by the work they cause, not where the work shows up:

  1. Pull the last 20 orders that ended in a credit memo, a short payment, a status call or a late delivery.

  2. For each, note the handoff where it went wrong and the minutes people spent fixing it, in every department.

  3. Add the routine minutes each handoff takes on every order.

  4. Score each handoff: occurrences a month × minutes each. Automate the top one first.

Order to cash automation example in numbers

Our example: a distributor taking 1,200 orders a month by email and PDF, with 360 purchase orders a month that need a confirmed ship date, 300 where-is-my-order requests, 240 past-due invoices and 1,000 payments to apply, 8% of them short. Minutes per task are our assumptions; swap in yours. Every line grows in step with its count, so at three times the orders the hours triple.

Order entry

  • Occurrences a month: 1,200 orders

  • Minutes each: 9

  • Hours a month: 1,200 × 9 = 10,800 min = 180

Fixing entry errors (4% of orders)

  • Occurrences a month: 1,200 × 0.04 = 48

  • Minutes each: 45

  • Hours a month: 48 × 45 = 2,160 min = 36

Supplier ship-date chasing

  • Occurrences a month: 360 POs

  • Minutes each: 5

  • Hours a month: 360 × 5 = 1,800 min = 30

Where-is-my-order replies

  • Occurrences a month: 300

  • Minutes each: 6

  • Hours a month: 300 × 6 = 1,800 min = 30

Payment reminders and promises to pay

  • Occurrences a month: 240 invoices

  • Minutes each: 8

  • Hours a month: 240 × 8 = 1,920 min = 32

Cash application

  • Occurrences a month: 1,000 payments

  • Minutes each: 1.5

  • Hours a month: 1,000 × 1.5 = 1,500 min = 25

Researching short payments (8%)

  • Occurrences a month: 1,000 × 0.08 = 80

  • Minutes each: 30

  • Hours a month: 80 × 30 = 2,400 min = 40

Total

  • Hours a month: 180 + 36 + 30 + 30 + 32 + 25 + 40 = 373

Order entry and its errors are 180 + 36 = 216 hours, or 216 ÷ 373 = 58% of the total. In this example, that is the first fix.

What changes if orders arrive as drafts for the rep to check: say review takes 1.5 minutes instead of 9 (our assumption; time it during the shadow days below), so 1,200 × 1.5 = 1,800 minutes = 30 hours, which saves 180 - 30 = 150 hours. If errors fall from 4% to 1%, fixing them takes 1,200 × 0.01 × 45 = 540 minutes = 9 hours, which saves 36 - 9 = 27 more. That is 177 hours a month back from the first fix alone. At the $31.71 loaded cost of an order clerk hour worked out in our AI order entry guide [2], that is 177 × $31.71 = $5,613 a month.

The second fix is the pair of supplier chasing and where-is-my-order replies, 30 + 30 = 60 hours. They belong together: when a supplier’s date is confirmed and passed on, the customer has less reason to ask. The 40 hours of short-payment research shrink with the first fix too, because a price entered right at the order is not disputed at the payment.

How to run an order to cash automation pilot

  1. Pick one live problem. One slice of the work, such as emailed orders from your 50 largest contractors, or every open purchase order without a confirmed ship date.

  2. Take a two-week baseline from records you already keep: orders entered, minutes per order, credit memos, short payments, status calls, late lines.

  3. Agree the approvals. Which messages a person approves every time, which run under a rule once approved, and who gets the exceptions.

  4. Shadow for a few days. The automation drafts; people compare its drafts with what they did and time their review.

  5. Go live for four weeks and count the same numbers as the baseline.

  6. Decide to stop, widen to the next slice, or add the next handoff.

What to measure before and after

Measure

Why it matters

Minutes per order entered

The cost of the first handoff

Orders entered right the first time

Errors that become credit memos and short payments

Order cycle time

Days from the order arriving to shipping complete

On time in full

Whether the promise date held

Invoice disputes per 100 invoices

Upstream errors reaching AR

Days sales outstanding

Cash, at the end of the chain

Formulas for each are in the KPI section of our order to cash process guide.

Challenges and how to handle them

Item data. Customers order by their own part numbers and old descriptions. Build the cross-reference from past orders, and have the automation ask a person instead of guessing.

ERP access. Writing to the ERP needs a user with the same permissions a rep has, so every change shows in the ERP’s history under that user. Start with drafts a person posts.

Exceptions. A rush order, a new ship-to or a price change will not fit a rule. Send each to the person who owns that customer, with the email attached.

The team. Keep the work in their own inbox and ERP, let them approve each kind of message before it runs on its own, and let a manager switch any rule off.

Taking the first fix live on the order desk

On the distributor above, Morsa:

  1. Reads each emailed and PDF order as it arrives, matches the lines to your items and the customer’s prices, checks credit, and drafts the sales order in the ERP for the rep to approve.

  2. Asks the rep when a line is unclear instead of guessing, and remembers the answer for that customer.

  3. Asks suppliers to confirm ship dates on new purchase orders from the buyer’s mailbox, updates the ERP dates from their replies, and drafts the new date to the customer when one moves.

  4. Answers where-is-my-order with the ship date and tracking, and routes each short payment to the AR clerk with the invoice and PO attached.

A person approves each kind of message once, such as an order confirmation; after that it runs under that rule. Anything outside the rule, or anything Morsa is unsure of, goes to the person you name.

Book a 30-minute walkthrough

What to do this week

  • Pull 20 problem orders from last month and score the handoffs as above.

  • Time ten orders at the order desk, start to finish.

  • Pick one slice for a pilot and write down its two-week baseline.

  • When you compare tools, our order to cash software guide ranks them by how much of the chain each works.

Sources

  1. Atradius, Payment Practices Barometer: B2B payment practices trends US 2025 (PDF): https://atradius.us/dam/jcr%3A5609b617-ac29-4e30-8b01-0663a01d94bd/payment-practices-barometer-us-2025-en.pdf (read 17 November 2026)

  2. Morsa, AI order entry for distributors (loaded cost of an order clerk hour, from BLS wage and compensation data): https://morsa.ai/guides/ai-order-entry-for-distributors (read 17 November 2026)

Keep reading

Keep reading

Keep reading

Related pages

Guide

Guide

Guide

Order to cash process: the 9 steps, where the handoffs break, and the KPIs

Order to cash (O2C) is the business process that starts when a customer's order arrives and ends when the customer's payment is applied to the invoice. It runs in nine steps: receive the order, enter and check it, set the promise date, source what is short, ship, invoice, collect, apply the cash, and report. The main measure is days sales outstanding (DSO), and the errors that slow it, such as a wrong price or a supplier date nobody passed on, start at the handoffs between those steps.

Read the page

›

Guide

Guide

Guide

Order to cash software: the 8 best O2C solutions for 2026, ranked

Order to cash software automates the work between a customer's order and the cash applied to its invoice: order capture and entry, credit and price checks, supplier dates, invoicing, collections and cash application. Most products are built around one stretch of that chain. Finance-led suites such as HighRadius and Billtrust center on credit, invoicing, collections and cash; order capture tools such as Conexiom start at the inbox and end at the sales order.

Read the page

›

Guide

Guide

Guide

Sales order automation: the four ways to automate orders, and how order processing runs end to end

Sales order automation turns a customer's purchase order into a checked sales order in your ERP and a confirmed price and ship date back to the customer, without anyone retyping it. Orders get automated four ways: EDI from large accounts, a portal or webstore, your ERP's own rules and agents, and AI that reads email and PDF orders. Order processing automation carries the same order on through the promise date, credit release, allocation, shipping and the invoice.

Read the page

›

FAQs

FAQs

FAQs

Questions people ask

Questions people ask

Still have a question? A founder will answer.

01

Is RPA enough to automate order to cash?

For steps where the screens and inputs never change, such as invoice runs or posting EDI orders, yes. For emailed and PDF orders, supplier replies and customer questions, the input changes every time, so you need software that reads and asks.

02

Does order to cash automation replace the ERP?

No. The ERP stays the record of orders, stock, invoices and payments. Automation reads from it and writes the results back to it.

03

How long does it take to automate order to cash?

A pilot on one slice can start within days when the automation works in your existing inbox and ERP. Widening it to every customer and every step is done one handoff at a time, each proven before the next.

04

What is AI-powered order to cash?

It is order to cash automation where an AI model reads the free-text parts (orders, supplier replies, remittances, customer questions), matches them to ERP records and drafts the next step for a person to approve or for a rule to send.

05

What is the difference between order to cash automation and AR automation?

AR automation covers steps 6 to 8: invoicing, collections and cash application. Order to cash automation covers all nine steps, starting with the order, where many AR problems begin.

06

Can I automate EDI customers and email customers together?

Yes. EDI orders already arrive as data; the work is the customers who email PDFs and call. Run both into the same ERP, with the same price and credit checks, so the order desk sees one queue.

Where Morsa fits

Where Morsa fits

Where Morsa fits

Find out where AI could make your plant more money.

Answer a few questions about your plant. We come back with a free Manufacturing AI Profitability Plan, and we tell you honestly if we are not the right fit.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.

Machines, people, and vendors, finally in one. We start with yours.

For queries, feedback or suggestions

© 2026 Morsa. All Rights Reserved. A Product by Lunar.